Looking for an affordable Building and Pest Inspection in Bardon?
Our customers enjoy:
Building and Pest Inspection Brisbane have been providing quality inspections to Bardon home buyers for more than 10 years, with over 5000 satisfied customers. Our 3 day inspection turnaround, affordable prices guarantee and comprehensive reports have people coming back time and again.
To find out exactly what is included in our Building and Pest Inspections and why you need our detailed report, read on.
We ensure that your building and pest inspection report will be received within a maximum of 3 business days from when you book.
Your comprehensive building and pest report with photos is emailed on the same day as your inspection.
We follow up with a straightforward breakdown of the findings from your inspection report to ensure you understand what was found.
Your Inspector is an experienced, fully insured and licensed building and pest inspector.
Our very reasonable fees keep us in constant demand for new clients and referrals.
Many of our customers are referred by buyer’s agents, mortgage brokers & conveyancers.
Our experienced staff go beyond your expectations and provide valuable advice on if the property is likely to contain asbestos, estimated cost of repairs and even building advice if you are considering renovating.
For most people when they purchase a property there are usually two experts on your side, your conveyancer and your Building and Pest Inspector. Conveyancers rely on our reports and refer clients to our inspection service because we’ve perfected it since 2010 to give you EVERYTHING you need, plus any extras you may wish for peace of mind, BEFORE you invariably buy a house.
For bookings, all we need is your first name, mobile & email, inspection address, agent name & number. We contact the agent to arrange access, then we email you the confirmation details.
Our Pest and Building Inspectors are skilled & fully insured Licenced Builders.
Our Building Inspection is a visual inspection of all accessible areas of the interior, roof void, sub-floor & exterior of the property to detect safety hazards, major defects, minor defects & general maintenance.
Our Pest Inspectors are qualified with full Professional Indemnity insurance.
We do a thorough visual inspection of all accessible areas including the interior, roof void, sub-floor, & exterior of the property for termites & termite damage using state of the art Termite Detection technology, including a moisture meter and a thermal tool to detect termite movement in the walls.
NOTE: Moisture is the cause of ALL termite problems. We apply our Moisture Meter extensively to identify leaks and dampness issues, commonly found in the wet areas.
We take time to explain our findings clearly and simply. Your inspector will speak directly with you after the inspection in person or by phone. You are welcome to call the inspector back after reading your reports.
We will discuss any MAJOR ISSUES with you to help you make any important decisions such as negotiating on price, asking for defects to be repaired or terminating the contract.
Our comprehensive Building & Pest Inspection report gives you the Peace of Mind and knowledge you need to complete, renegotiate, or terminate, this property purchase with confidence. One or more photos are included to highlight each defect.
WATER IS, hands down, the #1 CAUSE OF COSTLY Building Defects and ALL Termite Problems. We heavily utilize our moisture meters to identify problems relating to leaking and dampness issues, most commonly found in wet areas.
We conduct the electrical checks that we can by law, including turning on light switches to check for flickering; the condition of the meter box; plus the presence of smoke alarms and safety switches.
Our plumbing checks include flushing toilets to check function and drainage; plus the gutters and downpipes for rust, damage and blockages. We also turn on taps to check for hammering and poor drainage.
In the yard we note defects to boundary fences and gates, the clothesline, garden shed, paths, driveways and retaining walls. The yard is more often less well maintained with more major defects and safety hazards found.
On the roof exterior we check the condition of cladding, fascia/barge boards, flashings, gutters and downpipes, the soffit/eaves and valleys. Broken tiles, rust and water damage are noted. Fungal growth is a sign that water is pooling
Masonry walls are closely examined for defects such as bricks fretting, cracking, damp damage, differential damage, inadequate joint sealant, mortar eroding, blocked vents, visible flashings and weep hole ventilation.
In the exterior, we note the condition of paint, any damp damage or cladding defects; maintenance items for outdoor structures including decks, balconies, patios, verandahs or pergolas; plus defects and safety hazards relating to handrails, steps, stairs and ramps.
In the interior, all rooms are inspected for building defects to the ceiling, doors, floor, painting, walls and windows. We carefully check if the floors are levels, windows and doors function normally and other signs of movement relating to major structural defects.
In the laundry and kitchen, we also note visible defects to bench tops, doors, drawers and cabinets; sinks, splashbacks, taps and waste traps. The range hood fan is tested for function. Common defects include failed or inadequate waterproofing plus leaking taps and pipes.
Built elements that commonly have defects due to wear and tear in bathrooms include the vanity, basin, bath, mirror, shower, shower screen, splashbacks, taps, waste traps, toilet cistern and pan. Ventilation, and exhaust fan function, is noted.
In the roof space we identify any issues relating to coverage, framing, insulation, parti wall and sarking. We commonly find insufficient insulation, even in new homes. Even when there is sufficient insulation we try our best to enter the roof void to traverse all accessible areas.
For structural reasons, it is very important to check the condition of bearers, joists, piers or stumps; note any cracked or leaking pipes, dampness, ventilation or drainage issues. We recommend removal of debris or stored items that encourage termites and other pests including rodents!
Our pre purchase Pest Inspection investigates for signs of termite damage, live termites and conducive conditions that could lead to termite attack. We report on whether the property has a current termite management system and we advise what you can do to reduce the risk of termite attack to protect your valuable asset
Brisbane’s council can identify areas within the municipality where buildings are likely to be attacked by termites.
Termite control measures are required for any new building, including alterations and extensions constructed within specified termite-prone zones under the regulations.
So, if you are buying an established property in a Declared Termite Area, does this increase your risk of termite attack?
Quick answer: No, as Building and Pest Inspection Brisbane has uncovered termites in every suburb of Brisbane. Yep, all of Brisbane is at risk of termite infestation IF there are conducive conditions on your property.
Termites can be the worst nightmare for home owners because of the extensive damage they can cause and because termites can reduce the value of your property. The termite species that cause the most building defects in Brisbane are Coptotermes, which can forage up to 50 metres from their nests and are attracted to moist timbers in your home. Coptotermes commonly nest at the base of a tree but we have found them nesting in sub-floors with poor drainage or inadequate ventilation.
It is important to keep the sub-floor, slab edge and weep holes clear of obstructions because our Pest Inspectors can find termites visually. For example, termites can enter the property by crawling up the stumps, external walls or over the slab edge into a weep hole. Vegetation should be removed to allow visual inspection of the full external perimeter of the property and sub-floors should be visually clear around the full internal perimeter walls and all stumps.
Our Pest Inspectors can also find termites by non-invasive methods using our moisture meter and Termatrac with thermal radar. When we locate an area within a wall with high moisture, we apply the Termatrac to accurately determine if there are termites in the walls
When you purchase a property by private treaty, a Building and Pest clause allows you to organise a qualified building and pest inspector to provide a written report on the condition of the property within a set time period. This will help you identify problems such as termite infestation or other significant building defects before the contract goes unconditional.
Standard contracts also offer a 3-day cooling off period. We guarantee to provide a Building and Pest inspection report within 3 days, so remember to organise your inspection right away after your offer is accepted.
Organising a Building and Pest inspection prior to the auction or making a bid is your only option. It’s common for buyers and vendors to book in the Building and Pest inspection before signing contracts to avoid the need for a Building and Pest clause. Contract risk can be avoided, especially if conditional finance is approved or if it’s a cash sale.
| Suburb | 5 year population change | Population 2016 | Population 2011 | Total houses 2016 | Total units 2016 | Median monthly mortgage repayment 2016 | Median weekly rent 2016 |
| Bardon | 244 | 9500 | 9256 | 2916 | 260 | $2,600 | $460 |
Bardon is a suburb of Brisbane West. Bardon population increased from 9256 to 9500 between 2011 and 2016 Census, an increase of 244. In 2016, Bardon real estate consists of 2916 houses and 260 units. In 2016, Bardon median monthly mortgage repayment of $2600 and median weekly rent of $460. [Source ABS]
